How to Update FlightScope Mevo+ Firmware

Firmware for the FlightScope Mevo+ (Plus) can be updated using the FS Golf app.

1. Power-on your FlightScope Mevo+ and connect to the Launch Monitor's Wi-Fi network, entering the Launch Monitor's 9-digit serial number as the password (for example M2-123456).

2. Open the FS Golf app.

   When the FS Golf app is opened, it will automatically download and install available firmware updates. This will automatically apply updates for both AVR and DSP firmware.

   Alternatively, to manually check for firmware updates:

   1. Open the FS Golf app and select Settings in the top-right.
   2. Select Radar Settings and scroll down to the firmware section, at the bottom.
   3. Select Check for FW Update.

3. Follow the on-screen prompts to continue to firmware update process.

Confirm your FlightScope Mevo+ Firmware Version

You can verify your firmware version in the FS Golf app:

1. Power-on your Mevo+ and connect to the Launch Monitor.

2. Open the FS Golf app, then select Settings in the top-right.

3. Select Radar Settings and scroll to the bottom.

   This will display your current firmware versions as two components:

   • AVR Version - this is the firmware version for the device's internal computer and hardware.
   • DSP Version - this is the firmware version for the Launch Monitor's sensor.